| |
CB9SNK > TECHNI 08.04.09 18:15l 121 Lines 3574 Bytes #999 (0) @ WW
BID : 51638_CB9SNK
Read: GAST
Subj: Scart pinout
Path: DBO841<FFLB0X<DBO595<BX0RBL<DP0RBL<CB0BBS<CB9SNK
Sent: 090405/2103Z @:CB9SNK.FRL.NLD.EU #:51638 [Sneek] Sneek $:51638_CB9SNK
From: CB9SNK@CB9SNK.FRL.NLD.EU
To : TECHNI@WW
SCART CONNECTOR PINOUT Table 1
SCART is the abbreviation for the french term 'Syndicat des Constructeurs d'Appareils Radiorecepteurs et Televiseurs'.
Table 1 was the original and allows for composite video input/output, RGB inputs and stereo audio. Table 2 was added to take S-video (S-VHS and Hi-8) inputs. This made pin 15 chrominance and pin 20 luminance.
Many TV sets have 2 SCART sockets. One is usually loke table 1 and the other like table 2, and pin 20 switchable from composite to S-Video luminance.
The first can switch from a composite input to RGB input. The second can switch from a composite input to an S-Video input, pin 20 being either composite in or luminance in. Usually the second socket outputs a selectable composite signal on pin 19.
Pin Signal Level Impedance
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio
5 RGB Ground Blue
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 RGB Blue In or Out 0.7 V 75 ohm
8 Audio/RGB switch / 16:9 High (9.5-12V) AVmode
Low (0-2V) TVmode >10kohm
9 RGB Ground Green
10 Comms Data 2
11 RGB Green In or Out 0.7 V 75 ohm
12 Comms Data 1
13 RGB Ground Red
14 Ground Data
15 RGB Red In or Out / Chrominance In or Out 0.7 V (Chrom.: 0.3 V burst) 75 ohm
16 Switching Signal between: High (1-3V) RGB
Low (0-0.4V) Composite 75 ohm
17 Ground Composite Video
18 Ground Blanking Signal
19 Sync Out or Composite Video Out 1V including sync 75 ohm
20 Sync In or Composite Video In 1V including sync 75 ohm
21 Ground/Shield (Chassis)
SCART CONNECTOR PINOUT Table 2
Pin Signal Level Impedance
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio
5 RGB Ground Blue
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 - - -
8 Fuction Select High (9.5-12V) AVmode
Low (0-2V) TVmode >10kohm
9 RGB Ground Green
10 Comms Data 2
11 - - -
12 Comms Data 1
13 Ground (chrominance)
14 Ground Data
15 Chrominance input 0.3V 75 ohm
16 - - -
17 Ground (luminance)
18 - - -
19 Video output (composite) 1V including sync 75 ohm
20 Luminance input 1V including sync 75 ohm
21 Ground/Shield (Chassis)
Cable between VCR and TV (Scart)
TV VCR
Audio Right Out 1 2 Audio Right In
Audio Right In 2 1 Audio Right Out
Audio Left Out 3 6 Audio Left In
Audio Left In 6 3 Audio Left Out
Audio Ground 4 4 Audio Ground
Red 15 15 Red
Red Ground 13 13 Red Ground
Green 11 11 Green
Green Ground 9 9 Green Ground
Blue 7 7 Blue
Blue Ground 5 5 Blue Ground
Status / 16:9 8 8 Status / 16:9
Reserved 10 10 Reserved
Reserved 12 12 Reserved
Fast Blanking Ground 14 14 Fast Blanking Ground
Fast Blanking 16 16 Fast Blanking
Video Out Ground 17 18 Video In Ground
Video In Ground 18 17 Video Out Ground
Video Out 19 20 Video In
Video In 20 19 Video Out
Ground 21 21 Ground
S-Video Cable for Scart S-Video Input
S-Video Out TV, Scart (Input)
Luminance Out (Y) 20 Luminance In
Chrominance Out (C) 15 Chrominance In
GND 4+17 GND
Audio Out L 2 Audio In L
Audio Out R 6 Audio In R
S-Video Connection Pinout
PIN DESCRIPTION Impedance Level
1 GND Ground (Y)
2 GND Ground (C)
3 Y Intensity (Luminance) 75 Ohms 1V incl. Sync.
4 C Color (Chrominance) 75 Ohms 0.3V Burst
View to the solder side
of the male connector
73's Danny NL2SNE
Lese vorherige Mail | Lese naechste Mail
| |
